Home Generac Pressure Washer Parts & Compatibility
Brand parts & accessory matching
Generac Pressure Washer Parts & Compatibility
Generac parts selection starts with the machine model and plumbing family. The official parts catalog distinguishes consumer M22 connections from professional quick-change systems, so pressure rating alone cannot establish hose, gun or pump fitment.
Generac parts: the model number determines the plumbing family
Start with the data tag, then decide whether the machine is a consumer M22 system or a professional quick-change system before selecting hoses or guns.
If you are still identifying the machine family, use the Generac pressure-washer hub.
Documented Generac replacement-part paths
| Part / class | Type | Status | Published compatibility detail |
|---|---|---|---|
| GEN0K0921A | 30-ft × 1/4-in hose | VERIFIED — MANUFACTURER LISTED | M22 connectors; max 3000 PSI; exact Generac model list published. |
| GEN0K1775A | 35-ft × 3/8-in hose | CONDITIONAL — professional system | Official catalog identifies 3/8-in hose with quick-connect hardware; exact machine fit still needs model confirmation. |
| GEN0K0543 | Spray gun | CONDITIONAL — M22 consumer class | Official catalog identifies M22 gun assembly; use exact model lookup for verified fit. |
| GEN0K6183 | Professional spray gun | CONDITIONAL — professional class | Catalog identifies 4200-PSI professional gun with quick-connect plumbing. |
| GEN0H9625A / GEN0H9640 | Lance assemblies | CONDITIONAL | Official accessory catalog lists 33-in and 20-in lance assemblies; exact connection/model remains required. |
| Triplex / belt-drive pump | Pump | UNKNOWN until exact machine/pump is identified | Do not infer fit from PSI/GPM; drive, shaft, mount and plumbing all vary. |
Consumer hose example: GEN0K0921A
Generac's own OrderTree entry describes GEN0K0921A as a 1/4-inch, 30-foot hose with M22 connectors and a 3000-PSI maximum pressure. It also lists specific Generac power-washer models. Most importantly for cross-system matching, the same record says consumer-series machines use M22 threaded connections while professional models use quick-change hose connections.
Gun and lance replacement must stay inside the same connection family
The official Generac accessory catalog lists an M22 gun assembly and a separate 4200-PSI professional gun with quick-connect plumbing. It also lists multiple lance assemblies. That is enough to reject a one-size-fits-all “Generac gun” assumption, but not enough to verify every machine from the catalog listing alone. Use the exact model lookup for the final fitment record.
Nozzles need orifice sizing after the connection is established
Generac lists several nozzle kits in its official catalog, while current pressure washers use quick-change spray tips. The tip's color or angle does not determine hydraulic size. For replacement tips, match the connection, then use the machine's flow and target pressure to select the correct nozzle size.
Pump replacement: preserve the exact drive architecture
A belt-drive Generac machine, a direct-drive Generac Pro machine and an electric Generac washer are not interchangeable pump platforms. If the exact pump part number is unavailable, verify the complete mechanical and hydraulic interface before considering an alternative.
Manufacturer sources
- Generac — Product information & manuals — model/serial support lookup.
- Generac — Aftermarket Parts — official parts path.
- Generac OrderTree — Pressure-washer accessories — hoses, guns, lances and nozzle kits.
- Generac OrderTree — GEN0K0921A hose — exact models, M22 connection and pressure rating.
- Generac — G0067120 belt-drive model — professional pump/hose/fitting architecture.
Sources reviewed August 28, 2026. PressureWasherMatch.com is independent and is not affiliated with or endorsed by Generac.
Frequently asked questions
What Generac models use the GEN0K0921A hose?
Generac OrderTree lists GEN0K0921A for models 0059910, 0059870, 0059890, 0060200, 0060220, 0060240 and 0061490. It is a 1/4-inch, 30-foot hose with M22 connectors and a 3000-PSI maximum rating.
Do Generac professional pressure washers use the same hose as consumer models?
No. Generac parts documentation says consumer models use M22 threaded hose connections while professional models use quick-change connections. The parts catalog also lists 3/8-inch quick-connect professional hoses.
Does Generac sell different pressure-washer guns for M22 and quick-connect systems?
Yes. The official parts catalog lists M22 consumer gun assemblies and a separate 4200-PSI professional gun with quick-connect plumbing.
Can a Generac nozzle kit be selected by spray color alone?
No. Spray angle and color identify pattern, not orifice size. Match nozzle size to machine flow and target pressure using the nozzle calculator or the exact manufacturer part record.
Are Generac pressure washer pumps interchangeable?
No. Generac machines include different electric, direct-drive triplex and belt-drive triplex systems. Exact pump model, drive, shaft, mount, RPM, ports, unloader and clearance all matter.
What should I do for a legacy Generac model?
Enter the exact model or serial number in Generac product support and confirm the original part number before using a current cross-reference or aftermarket replacement.